shanghai zhiye industry co.,ltd

we supply Pure iron, ingot iron,iron billet,soft iron, electric steel(iron), electric magnetic iron , ultra low carbon magnetic iron,soft magnetic iron bar SUYB-1, SAE AMS 7707C Iron, Iron Cathode.The chemical composition and physics characteristics, such as the coercive force is better than the International Standard. Our fabrication plant is equipped with large cutting machine, shearing machine, sawing machine, punch, lathe, mill machine, annealing furnace, and rattle barrel to meet the different needs of users. We check and audit the quality according to the quality certificate strictly.

Trademark B-A Chemical composition(%,max)

C 0.003 Si 0.01 Mn 0.20 P 0.012 S 0.006 Al 0.15-0.50 Cr 0.02 Ni 0.01 Cu 0.02

Trademark B-AA  Chemical composition(%,max)

C 0.002 Si 0.006 Mn 0.12 P 0.007 S 0.001 Al 0.15-0.50 Cr 0.02 Ni 0.01 Cu 0.005

Trademark B-B  Chemical composition(%,max)

C 0.003 Si 0.01 Mn 0.13 P 0.009 S 0.006 Al 0.03 Cr 0.01 Ni 0.01 Cu 0.02

Trademark B-C  Chemical composition(%,max)

C 0.002 Si 0.01 Mn 0.03 P 0.006 S 0.005 Al 0.01 Cr 0.01 Ni 0.01 Cu 0.01   

Type(mm):
Medium plate and steel billet(8-250),plate coil(12-25),straight round steel(dia6.5-dia300),round steel coil,cold drawn plate coil(0.5-2.5) etc.
We can produce the special type which you ask  

application of trademark B-A: 

a.make it in electric core，heel piece, gag bit in electric appliance device,telecommunication

b.Electric core of electric iron

c.Electromagnetic part of instruments and meters

d.Iron core and shell of direct-current dynamo

e.Electric part or magnetic part for car,tractor,lathe

f.Magnetic shielding apparatus 

Charateristic

(1).good electromagnet character。Coercive force（Hc）low,high magnetic permeability，，high saturation induction density (Bs)，stable magnet and no magnetic aging

(2) high pure,electric pure iron,is full killed steel,refine,so the density is high,average,good,little gas,C≤0.004%，this is a reliable condition that customer simplify and cut down the anneal process of the parts.
(3) cold drawn,hot roll,forge。Cold process,these is no problem such as lathe,drill,punch,bend,drawn。Hot process,such as forge,roll,there is little redsear sensibility,it is a good condition for doing in a large degree scope。

International standard

magnetic aging：keep 100℃ for 100 hours or Condition is 790°C – 2 hours, after – cooling with the furnace.  

Appliance of trademark(from B-B to B-C): 

The raw material of all kinds precise alloy,electric alloy,soft magnet,amorphous alloy and permanent magnet(such as NdFeB) etc.

Sealing
rubber high- technology: [FFKM,FFPM,PERFLUOROELASTOMER]

Application:

Mechanical
technology,Aerospace and Defense,Marine drilling, oil and gas,Cars, heavy
trucks, trains, ships,Water treatment,Nuclear,water power,wind power,Food,drink,Conductor
etc 

Character:

FFKM Perfluoroelastomers have a strong Corrosion
resistance, high temperature

 Standard:

Chinese Standard GB3452.1-92

USA Standard AS568A

German Standard Din 3701

Japanese Standard JIS B2401

International Standard ISO3601

Other Standard type

Product:

O-ring:

a.  good
character,high work time,it works about 8 times than comman seal,20 times max

b.  work
pressure:0-300MPa, work temperature:-55-250 ℃ ,work speed: ≤15m/s

c.  Applicable medium: hydraulic oil, gas, water, mud, crude oil,
emulsion, water - ethylene glycol, acid

X-ring,U-ring,Hydraulic seals,high press
seals(1090),PTFE,FFKM perfluoroelastomers, etd(we can produce what you ask)

material:

1.       
FFKM

A.Excellent
corrosion resistance, almost all chemicals, including acids, alkalis, ketones,
esters, ethers, aldehydes, amines, alcohols, strong oxidizing agents.

B.Excellent
heat resistance, long-term temperature up to 316 ℃.

[FFKM,FFPM,PERFLUOROELASTOMER）,can
substitute for label(CHEMRAZ,ISOLAST,PERLAST,SIMRIZ,Parofluor)